Showing posts with label Yaesu FT991 How to load firmware. Show all posts
Showing posts with label Yaesu FT991 How to load firmware. Show all posts

How do I use VOX to PTT from the FT-991’s USB Audio codec?

How do I use VOX to PTT from the FT-991’s USB Audio codec?

Cause/Symptom:

How do I use VOX to PTT from the FT-991’s Internal sound card? My Digital mode software requires that I use VOX instead of a CAT command to PTT.

Solution:

Set the following menu settings on the FT-991 to enable VOX for Transmissions through the USB Soundcard that is integrated into the FT-991:

Menu 70 DATA IN SELECT=Rear
Menu 71 DATA PTT SELECT=DAKY
Menu 108 SSB MIC SELECT=Rear
Menu 110 SSB PTT SELECT=DAKY
Menu 111 SSB PORT SELECT=USB
Menu 114 CONTOUR LEVEL=Default
Menu 144 VOX SELECT=DATA

Setup Wires-x and YAESU FT-991 with HRI-200

Setup Wires-x and YAESU FT-991 with HRI-200

It is possible to connect to another node via RF but it will depend on your antenna, the other stations antenna, power out, distance, etc.  Plus some nodes are not on the air  24/7.

The best way to use Wires-x is to buy another rig as a node rig, like the FTM-100d and a HRI-200, then connect to it using your FT-991 in wires-x mode, doing this you will be connected via the internet to the the Wires-x system and then you can connect to any active node anywhere. If you use C4FM rigs you can do this digital which gives you more functions and better audio.  You can also use analog, any VHF/UHF rig with the 6 pin mini din, like on the back of the FT-991 is plug and play with the HRI-200, but you will still need two rigs, plus the HRI-200.

I know it sounds like a lot but it is a good system and fun to use.

FT-991 Manually Connecting To Wires-X Node




https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=249&encProdID=1D23D01F7B34D76072988D9857AA1A7C&DivisionID=65&isArchived=0


Yaesu FT-991(A) Users Group (groups.io)
https://groups.io/g/Yaesu-FT-991






Yaesu FT-991 Transceiver is capable


The Yaesu FT-991 Transceiver is capable of operating SSB, CW, AM, FM, Packet and System Fusion C4FMDigital. The legendary tradition of Yaesu design is a legacy of excellence established decades ago, providing quality, stability and durability.

The Yaesu FT-991 is designed for the most competitive operating situations, with a suite of new features to’enhance the experience. Whether you primarily operate at home, mobile or in the field, the FT-991 will provide outstanding fundamental performance and an inviting expansion into a full featured base station.

Radio Features;

160 Meters through 70 Centimeters – SSB/CW/FM/C4FM Digital/AM/RTTY/PSK
100 Watts (2 Meter / 70 Centimeter: 50 Watts) of Solid Performance
3.5 inch TFT Full-Color Touch Panel Operation for Superior Operability and Visibility
High Speed Spectrum Scope with ASC (Automatic Spectrum-Scope Control) built-in
Roofing Filter 3 kHz and 15 kHz
High Accuracy TCXO ±0.5 ppm and high resolution DDS and PLL local oscillator
32-bit High Speed Floating Point IF DSP
IF WIDTH and IF SHIFT provides great QRM Rejection
CONTOUR, DNR, IF Notch and APF (Audio Peak Filter, CW only)
160 – 6 Meters High Speed Automatic Antenna Tuner is included

http://systemfusion.yaesu.com/ft-991/

YAESU FT-991 review

I held off buying initially as I was worried about all the problems being reported. I was torn between something top drawer like the FTDX-5000MP and an all things to all men like the FT-991.

The FT-991 should have been my choice of radio as soon as it came out. Its got all I want from a radio – decent receiver, battery capable, and one radio for all bands, all modes, both portable and base.

However, I was stuck in the “I like a traditional radio” mentality and kept buying and selling the FT-817ND/FT-857D/FT-897D but the receiver is just too noisy, even using an external speaker and DSP, they never stayed in the shack long. When the FTDX-5000MP went down to £3,600 including the station monitor, I snapped one up – my 3rd FTDX-5000 since becoming a ham back in 2008. Alas, I wasn't happy running on a uninterruptable power supply should there be a power cut and so I tried an FT-991. The FTDX-5000MP is going up for sale – as is the FT-7900 which becomes surplus to requirements.

I have only had it two weeks but my PA stage hasn't blown yet, even under some pretty tricky tuning cycles on the extremes of 160m using the YT-1200 ATU (which is excellent – used one on the FT-450D and FTDX-3000). My other fear was the longevity of the touch screen. That seems quite robust and I find myself saying “hey do you think anything lasts forever? Especially something costing only £1,150!”. OK the receiver isn't going to be hardcore like the K3 or the FTDX-5000 but remember the kind of pileups T32C DXpedition had to handle with just FT-450D rigs, well, I think following their achievements, anything is possible and the FT-991 is streets ahead of the FT-450D.

FT-991 Software Update

The latest versions are listed below with the release dates. 
MAIN Software Version 02-02 (07/24/15)
DSP Software Version 01-04 (07/24/15)
TFT Software Version 02-01 (07/24/15) 

*If you already have MAIN: Ver. 02-02, DSP: Ver. 01-04 and TFT: Ver. 02-01 software versions, it is not necessary to update the FT-991 again. 

There are four different Software installations. Each one must be followed carefully. Installing the wrong type software may cause difficulties. Check your radio before installing software to be sure which updates are needed. Please read the FT-991 Firmware Upgrade Manual before proceeding. 

If multiple software installations are required the MAIN software should be installed first, as it is the only one that requires a press and hold in the [F(M-LIST)] key while turning the radio back on. This resets the radio and locks in the new software.
Before installing new firmware, please verify your current version firmware with the following procedure:

FT-991 Software Update and Version Identification

Download the FT-991 data and [FT-991_Firmware_Update_JUL24.zip] from the following website:
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=D24F 60F33816ED8BE5568D7E2B5E2131&DivisionID=65&isArchived=0 

Please read the FT-991 Firmware Upgrade Manual before proceeding! Main: Ver. 0202, DSP: Ver. 0104 and TFT: Ver. 0201 (07/24/15)
  • The WIRES-X function is added*
  • Improved and optimized.
    *This new firmware update enables the FT-991 operator to connect to a WiRES-X Node station and easily communicate worldwide through the WiRES-X VoIP network, without the need for any additional accessories.
    We hope this new firmware will increase your enjoyment of your FT-991. Thank you for choosing Yaesu radios. If you have any problems or questions, please contact Yaesu, Amateur Tech Support amateurtech@yaesu.com
http://systemfusion.yaesu.com/ft-991/

Yaesu FT-991 Series: Part 1 - Unboxing

Yaesu FT-991 Series: Part 1 - Unboxing

This is my first in a series of videos on the Yaesu FT-991 HF/VHF/UHF all-mode + C4FM Digital amateur radio transceiver.
I plan to release future videos about this rig in order to demonstrate its functions and how it works.
Suggestions? Requests? Please let me know. Comment here or tweet @marsradio
Please subscribe to my channel. Thank you for watching!

Note: I am in no-way being paid by Yaesu or anyone to do these product demonstration videos. These videos are produced for information and enjoyment and educational purposes.


Yaesu FT-991 vs FTDX-5000MP - HF SSB Comparison

Yaesu FT-991 vs FTDX-5000MP - HF SSB Comparison
Both antennas are almost identical. Speaker on the FT-991 Transceiver is the Yaesu MLS-200, the FTDX-5000MP is using its SM-5000 speakers. I have tried to keep the width/DNR/IPO settings the same on both radios.

The FT-991 is brand new in the shack and because of the mixed reviews, I haven't even removed the plastic covers. So far, quite good. The lack of buttons means adjustment to DSP settings is more involved on the FT-991 compared with the FTDX-5000 and believe it or not, the internal ATU accepts a wider range of impedances on the '5000 too!


Yaesu FT-991 All Mode HF/UHF/VHF

Yaesu FT-991 All Mode HF/UHF/VHF






HF/UHF/VHF

Forsale I have the Yaesu FT-991and all original accessoriesincluding box not shown. Thisradio is less than 4 months oldin mint condition there are nomarks or issues with it and couldbe sold as new. Radio was kept ina non-smoking environment and Iam the original owner.
This is a steal of a deal don'tmiss out!

I am asking $1275 shipped UPSinsured to US only.
USPS money order or Bank Checkpayment only.

Video of it working can be found here:
https://www.youtube.com/watch?v=KCI2GeV_GqU

Yaesu FT-991 All Mode
http://www.eham.net/classifieds/detail/476985?utm_campaign=eham&utm_medium=twitter&utm_source=twitter